Taiyo Optics (Dongguan) Corp.

Showing 1 - 10 of 28, total 3 pages [First] [Previous] [Next] [Last]

metal high reflective film
Specification: 5 mm to 500 mm
Detail: parameter for prism: Material:H-K9L,H-BaK7,etc; Surface quality:40-20/20-10; Dimensional tolerance:plus or minus 0.05mm; Surface flatness:1/2 lambda; Angle tolerance:plus or minus 2 arc min.

dielectric high reflective film
Specification: 5 mm to 500 mm
Detail: arameter for coating: Dielectric high reflective film-0 degrees high reflection,greater than 99% over wavelength ranges 900 to 1300 nm. parameter for prism: Material:H-K9L,H-BaK7,etc; Surface quality:40-20/20-10; Dim...

mgf2 single-layer antireflection film
Specification: 5 mm to 500 mm
Detail: parameter for coating: MgF2 single-layer antireflection film-0 degrees Lower than 2.5% reflection over wavelength ranges 400 to 750 nm; Lower than 1.5% reflection over wavelength ranges 500 to 620 nm. MgF2 single-layer ...

cementing of inverting prism
Specification: 5 mm to 500 mm
Detail: Material:H-K9L,H-BaK7,etc; Surface quality:40-20/20-10; Dimensional tolerance:0.05mm; Surface flatness:lambda/2; Angle tolerance:3'; Parallelism tolerance:3'.

cementing of penta prism
Specification: 5 mm to 500 mm
Detail: Material:H-K9L,H-BaK7,etc; Surface quality:40-20/20-10; Dimensional tolerance:0.05mm; Surface flatness:lambda/2; Angle tolerance:3'; Parallelism tolerance:3'.

blu-ray dvd glued prism
Specification: 5 mm to 500 mm
Detail: Material:H-K9L,H-BaK7,etc; Surface quality:40-20/20-10; Dimensional tolerance:0.05mm; Surface flatness:lambda/2; Angle tolerance:3'; Parallelism tolerance:3'.

rectangle cementing of the splitting prism
Specification: 5 mm to 500 mm
Detail: Material:H-K9L,H-BaK7,etc; Surface quality:40-20/20-10; Dimensional tolerance:0.05mm; Surface flatness:lambda/2; Angle tolerance:3'; Parallelism tolerance:3'.

cementing of the splitting prism
Specification: 5 mm to 500 mm
Detail: Material:H-K9L,H-BaK7,etc; Surface quality:40-20/20-10; Dimensional tolerance:0.05mm; Surface flatness:lambda/2; Angle tolerance:3'; Parallelism tolerance:3'.

cementing of the abbe roof prism
Specification: 5 mm to 500 mm
Detail: Material:H-K9L,H-BaK7,etc; Surface quality:40-20/20-10; Dimensional tolerance:0.05mm; Surface flatness:lambda/2; Angle tolerance:3'; Parallelism tolerance:3'.

laser galvanometer
Specification: 5 mm to 500 mm
Detail: A mirror is an object that reflects light in such a way that, for incident light in some range of wavelengths, the reflected light preserves many or most of the ***ailed physical characteristics of the original light. This...


Showing 1 - 10 of 28, total 3 pages [First] [Previous] [Next] [Last]
1 2 3